This is a special version that is made in the vintage semi-gloss black finishing that match the finishing of old school 1st Generation E Series lights.
This tailcap follows design of the original Z52 twisty tailcap that was used on the early generation E Series lights and would be the perfect replacement of all worn out tailcaps.

Momentary Twisty internals.

This is a special version that is made in the vintage semi-gloss black finishing that match the finishing of old school 1st Generation E Series lights.
This tailcap follows design of the original Z52 twisty tailcap that was used on the early generation E Series lights and would be the perfect replacement of all worn out tailcaps.

McClicky Switch internals.

HA3 Natural Version of the Z52 Style Twisty Tailcap for the Surefire E Series lights.

This tailcap is fully compatible with the McClicky, you can switch the internal twisty to a McClicky in no time and it is a fully reversible process in case you would like to use it as a twisty again!!

Made with highest grade 7075-T6 Aerospace Aluminum.
Perfect for high current setups such as the IMR-E2 setup for the E Series lights and tactical momentary applications.

New 2019 Version with perfect square knurling and outstanding HA3 Natural Anodization!!

This tailcap follows design of the original Z52 twisty tailcap that was used on the early generation E Series lights and would be the perfect replacement of all worn out tailcaps.

Compatible with:

E1E, E2E, E2O, E1L, E2L, E1D, E2D
E2DL
E2L AA Outdoorsman
E2T-MV Tactician
E1B
E1B-MV Backup MV
L4 Lumamax
M300, M600 Weaponlights
V1 Vampire, V1-C Vampire
Aviator

HA3 Flat Black Version of the Z52 Twisty Tailcap for the Surefire E Series lights.

This is a good match for the newer E Series Flashlights which has a HA3 flat black finish.

This tailcap is fully compatible with the McClicky, you can switch the internal twisty to a McClicky in no time and it is a fully reversible process in case you would like to use it as a twisty again!!

Made with highest grade 7075-T6 Aerospace Aluminum.
Perfect for high current setups such as the IMR-E2 setup for the E Series lights and tactical momentary applications.

This tailcap follows design of the original Z52 twisty tailcap that was used on the early generation E Series lights and would be the perfect replacement of all worn out tailcaps.

Compatible with:

E1E, E2E, E2O, E1L, E2L, E1D, E2D
E2DL
E2L AA Outdoorsman
E2T-MV Tactician
E1B
E1B-MV Backup MV
L4 Lumamax
V1 Vampire, V1-C Vampire
Aviator

HA3 Natural Version of the Z52 Style Tailcap for the Surefire E Series lights.

This tailcap is the E Series tailcap with McClicky installed.

The famous McClicky made by McGizmo in the USA can take up to 6A current and has a low resistance, it is truly the best switch for any application.
It will not flutter and is ideal for both single and multi-mode setups.

Made with highest grade 7075-T6 Aerospace Aluminum
Perfect for high current setups such as the IMR-E2 setup for the E Series lights and tactical momentary applications.

New 2019 Version with perfect square knurling and outstanding HA3 Natural Anodization!!

This tailcap follows design of the original Z52 twisty tailcap that was used on the early generation E Series lights and would be the perfect replacement of all worn out tailcaps.

Compatible with:

E1E, E2E, E2O, E1L, E2L, E1D, E2D
E2DL
E2L AA Outdoorsman
E2T-MV Tactician
E1B
E1B-MV Backup MV
L4 Lumamax
M300, M600 Weaponlights
V1 Vampire, V1-C Vampire
Aviator

HA3 Flat Black Version of the Z52 Style Tailcap for the Surefire E Series lights.

This is a good match for the newer E Series Flashlights which has a HA3 flat black finish.

This tailcap is the E Series tailcap with McClicky installed.

The famous McClicky made by McGizmo in the USA can take up to 6A current and has a low resistance, it is truly the best switch for any application.
It will not flutter and is ideal for both single and multi-mode setups.

Made with highest grade 7075-T6 Aerospace Aluminum
Perfect for high current setups such as the IMR-E2 setup for the E Series lights and tactical momentary applications.

This tailcap follows design of the original Z52 twisty tailcap that was used on the early generation E Series lights and would be the perfect replacement of all worn out tailcaps.

Compatible with:

E1E, E2E, E2O, E1L, E2L, E1D, E2D
E2DL
E2L AA Outdoorsman
E2T-MV Tactician
E1B
E1B-MV Backup MV
L4 Lumamax
V1 Vampire, V1-C Vampire
Aviator