E2-LED High Output Single Mode LED Tower Module
(3.6V-9V Regulated Input)

Generation 6: (Cool White) Updated to Nichia 519A LED, Fully Potted Internals

-High Output Nichia 519A LED (Max Output 660 Lumens)
-3.6V to 9V Regulated Input for Maximum Flexibility
-Maximum Current Output at 1600mA
-Cool White, Cool Colour Temperature (5700K)
-Direct Thermal Copper MCPCB
-Internals Fully Potted
-Reverse Polarity Input Protection
-Over-Discharge Protection
-Precision Machined Aluminum Lamp Assembly
-Every Lamp Assembly is Pre-Focused for the Ultimate Spot
***If you are planning to use a 1 cell battery setup, please buy the E1-LED instead of this module.***
***This module is intended for 2 cell battery setup ONLY.***

Compatible with:

Surefire
E2, E2e, E2O, E2D
M600 Series Weapon Lights

***If you are planning to use a 1 cell battery setup, please buy the E1-LED instead of this module.***
***This module is intended for 2 cell battery setup ONLY.***

***Do NOT use "Protected" Rechargeable Batteries with this LED module.***
***Using "Protected" Rechargeable Batteries will damage this LED module.***

Runtime:

2 x CR123a Primaries: ~1.5 hours
2 x 16340 3.7V Rechargeable: ~1 hours (Non-Protected Rechargeable Batteries ONLY)
2 x 18350 3.7V Rechargeable: ~1.5 hours (Non-Protected Rechargeable Batteries ONLY)

E2-LED High Output Single Mode LED Tower Module

Generation 5.5: (Neutral White) Nichia 319A LED, Fully Potted Internals

-High Output Nichia 319A, Neutral Tint 80-CRI LED (Max Output 550 Lumens)
-3.6V to 9V Regulated Input for Maximum Flexibility
-Maximum Current Output at 1600mA
-Neutral White, Neutral Colour Temperature (4000K)
-High Colour Rendition 80-CRI
-Direct Thermal Copper MCPCB
-Internals Fully Potted
-Reverse Polarity Input Protection
-Over-Discharge Protection
-Precision Machined Aluminum Lamp Assembly
-Every Lamp Assembly is Pre-Focused for the Ultimate Spot

***If you are planning to use a 1 cell battery setup, please buy the E1-LED instead of this module.***
***This module is intended for 2 cell battery setup ONLY.***

Compatible with:

Surefire
E2, E2e, E2O, E2D
M600 Series Weapon Lights

***If you are planning to use a 1 cell battery setup, please buy the E1-LED instead of this module.***
***This module is intended for 2 cell battery setup ONLY.***

***Do NOT use "Protected" Rechargeable Batteries with this LED module.***
***Using "Protected" Rechargeable Batteries will damage this LED module.***

Runtime:

2 x CR123a Primaries: ~1.5 hours
2 x 16340 3.7V Rechargeable: ~1 hours (Non-Protected Rechargeable Batteries ONLY)
2 x 18350 3.7V Rechargeable: ~1.5 hours (Non-Protected Rechargeable Batteries ONLY)

E2-LED High Output Single Mode LED Tower Module
(3.6V-9V Regulated Input)

Generation 6: (Warm White) Updated to Nichia 519A R9080 LED, Fully Potted Internals

-High Output Nichia 519A R9080 LED (Max Output 550 Lumens)
-3.6V to 9V Regulated Input for Maximum Flexibility
-Warm White, Warm Colour Temperature (3000K)
-90+CRI, Ultra High Colour Rendition
-Direct Thermal Copper MCPCB
-Internals Fully Potted
-Reverse Polarity Input Protection
-Over-Discharge Protection
-Precision Machined Aluminum Lamp Assembly
-Every Lamp Assembly is Pre-Focused for the Ultimate Spot

***If you are planning to use a 1 cell battery setup, please buy the E1-LED instead of this module.***
***This module is intended for 2 cell battery setup ONLY.***

Compatible with:

Surefire
E2, E2e, E2O, E2D
M600 Series Weapon Lights

***If you are planning to use a 1 cell battery setup, please buy the E1-LED instead of this module.***
***This module is intended for 2 cell battery setup ONLY.***

***Do NOT use "Protected" Rechargeable Batteries with this LED module.***
***Using "Protected" Rechargeable Batteries will damage this LED module.***

Runtime:

2 x CR123a Primaries: ~1.5 hours
2 x 16340 3.7V Rechargeable: ~1 hours (Non-Protected Rechargeable Batteries ONLY)
2 x 18350 3.7V Rechargeable: ~1.5 hours (Non-Protected Rechargeable Batteries ONLY)