D26-LED High Output 3 Mode LED Reflector Module
(3.6V-13V Regulated Input)

Generation 9: (Cool White) Updated to Nichia 519A LED, 2000mA Driver
Generation 7: (Neutral White) Nichia 319A LED, 2000mA Driver
Generation 9: (Warm White) Updated to Nichia 519A R9080 LED, 2000mA Driver

-High Output Nichia 519A or Nichia 319A LED
(Max Output from 850 to 1100 Lumens depending on model)
-3.6V to 13V Regulated Input for Maximum Flexibility
-3 Modes with Memory Function (5%-30%-100%)
-Maximum Current Output at 2000mA
-Cool White (5700K), Neutral Tint (4000K) or Warm White (3000K)
-Reverse Polarity Input Protection
-Over-Discharge Protection
-Unique Reflector Design
-Precision Machined Aluminum Reflector
-High Temperature Resistant Orange Peel or Mirror Finish Coating
-Every Reflector Module is Pre-Focused for the Ultimate Spot

***This is a multi mode module, it is not recommended for tactical use due to the inability for momentary operations.***


Compatible with:

Surefire
G2, G3, 6P, 9P, D2, D3, C2, C3, Z2, Z3, M2

G&P
G60 Series, G90 Series

Pila
GL2, GL3

Runtime on 100%:

***If you are planning to use a 1 cell battery setup that is less than a 16650 (such as a 14500 or 16340 or 18350), please buy the 2.7V-4.5V model instead of this module.***
1 x 16650 (2500mAh): ~1.5 hour
1 x 17670 (1600mAh): ~1 hour
1 x 18650 (2900mAh): ~2 hours
2 x CR123a Primaries: ~2 hours
2 x RCR123 (750mAh): ~2 hours
3 x CR123a Primaries: ~3 hours
3 x RCR123 (750mAh): ~3 Hours
2 x 17500 (1100mAh): ~2.5 hours
2 x 18500 (1500mAh): ~3 hours
2 x 18650 (2900mAh): ~5.5 hours
3 x 18500 (1500mAh): ~6 hours